Sipcolite Synthetic Enamel

  • Surfacers to be Painted   

:Metal, Wood, Plaster & variety of other Surfacers, which are not subject to outdoor exposure.

  • Viscosity of Supply

:90 ± 5 second at 30°C by Ford Cup B 4.

  • Shades Available 

:As per Shade Card

  • Viscosity of Application

:(a) Brushing-55 to 60 seconds 
:(b)Spraying-30 to 40 seconds at a pressure 3.5Kg/CM2, 40-50 p.s. i.

  • Finish   

:Smooth with Full gloss.

  • Thinner Recommended   

:MTO & Petrol & company supplied thinners

  • Primer/Surfacer to be used 

:For Metals
under White & Pastel Shades. 
Sipcolite Surfacer White for Metal 
:For Other Shades 
Sipcolac Metal Primer RP-1.
Sipcolac Red Oxide Zinc Chromate Primer RP-2.
:For Wood
Sipcolite White Surfacer for Wood.
Sipcolite Pink Surfacer for Wood.
:For Plaster  
Sipcolite White Surfacer  for Cement

:Brush, dip, spray or roller.

  • Covering Capacity 
    (on prepared smooth mild steel surface)  

:14 to 20 sq. mt / ltr per coat at 15-20microns thickness(depending upon the surface and shade used)

  • Drying Time 

:Surface Dry-Less than 3 hours Hard Dry-Less than 12 hours. This property depend upon the ambient temperature and humidity.

  •  Flash Point   

:Above 35°C

  • Directions for Use

:Ensure that the surface is free from rust, grease, moisture & loose particles. After priming the surface apply Sipcolite Enamel On previous painted Surfacers Primer/Surfacer is not necessary. For application of two or more coats, an interval of over night drying should be allowed. For suitable adhesion and to obtain smooth & full glass, wet rub the first coat with water proof abrasive paper no. 320 before applying the second coat.