SIPCO N.C. SANDING SEALER

  • Surfaces to be Painted 

:Wooden furniture which are not subject to outdoor exposure. It  is  also well  suited  for  finishing  of  less  exposed surfaces such as the interior of drawers, cup boards etc.

  • Viscosity of Application 

:(a) Brushing-55 to 60 seconds.
:(b) Spraying-30 to 35 seconds at a pressure of 3.5 Kg/CM2, 40-50 p. s.i.

  •   Thinner Recommended

:NC Thinner

  • Methods of Application

:By  Brush, Conventional spray and by cloth

  • Covering Capacity
    (on prepared smooth mild steel surface)

:8 to 10 sq. mt/ltr per coat
(depending upon the application and coating thickness )

  • Drying Time

:Surface Dry-Less than 15 minutes. Sanding Dry: 1 hour. (Drying will depend upon the ambient temperature and humidity.)

  • Flash Point

:Above 25°C

  • Directions for Use

: Ensure that the surface is free from rust, grease, moisture & loose particles. Clean  the  surface  by  rough  sanding  with  emery  paper 180 and wipe clean. If the wood  is  oily,  wipe  down  well  with  a  suitable  solvent.  Thin  down  the  NC  sanding  sealer  with  NC  thinner  to  the required application consistency.

  • Shelf Life

Minimum 12 Months in unopened containers