Sipcolac Super Synthetic Premium Enamel

  • Surfacers to be Painted

: Metal, Wood, Plaster & variety of other Surfacers.

  • Viscosity of Supply

90±5 Seconds at 30°C by Ford Cup B4.

  • Shades Available

:As per Sipcolac Shade Card

  • Viscosity-of Application

:(a) Brushing-50 to 60 seconds.
:(b)Spraying-30 to 40 seconds at a pressure of 3.5 Kg/CM2,40-50 p s.i.

  • Finish

:Glossy.

  • Thinner Recommended

:MTO & Petrol

  • Primer/Surfacer to be used

:For Metals
Under White & Pastel Shades.
Sipcolite White Primer for Metal.
Sipcolite White under coating for Wood/Metal.

:For Other Shades
Sipcolac Metal Primer RP-1.
Sipcolac Red Oxide Zinc Chromate Primer RP-5.

:For Wood 
Sipcolite White Surfacer for Wood.
Sipcolite Pink Surfacer for Wood.

:For Plaster 
Sipcolite White Surfacer for Cement.
  • Methods of Application

:Brush, dip, spray or roller.

  • Covering Capacity(on prepared smooth milld steel surface)

:15 to 22 sq. mt/tr per coat at 15-22 microns thickness (depending upon the surface & shade used)

  • Drying Time

:Surface Dry-Less than 2 hours             Hard Dry-Less than 6 hours.                This property depends upon the ambient temperature and humidity.

  • Flash Point

:Above 35°C (95 °F)

  • Directions For Use

:Ensure that the surface is free from rust, grease, moisture & loose particles After priming the surface apply Sipcolac Enamel, On previous painted Surfacers Primer/Surfacer is not necessary. Allow a minimum time of 4-6 hours before application of the second coat. To get mirror like gloss, the first coat should be wet rubed with water proof paper no. 320-400 before the second coat is given.