Dhanush Synthetic Enamel

  • Surfacers to be Painted 

:Metal, Wood, Plaster & variety of other Surfacers, which are not subject to outdoor exposure.

  • Viscosity of Supply

:90 ± 5 second at 30°C by Ford Cup B 4.

  • Shades Available 

:As per Shade Card,

  • Viscosity of Application 

:(a) Brushing-55 to 60 seconds.
:(b) Spraying-30 to 35 seconds at a pressure of 3.5 Kg/CM2, 40-50 p. s.i.

  •    Finish

:Smooth & Glossy.

  •   Thinner Recommended

:Turpentine oil

  • Primer/Surfacer to be used    

:For Metals
under White & Pastel Shades.
Sipcolite White Surfacer for Metal
Dhanush Red Oxide Metal Primer RP-7.
Sipcolite Red Oxide Zinc Chromate metal Primer RP-5.
:Wood
Sipcolite White Surfacer for wood. Sipcolite Pink Primer/Surfacer for Wood.
:For Plaster
Sipcolite White Surfacer for Cement

  • Methods of Application

:Brushing, spraying.
  • Covering Capacity
    (on prepared smooth mild steel surface)

:14 to 18 sq. mt/ltr per coat
(depending upon the surface and shade used)

  • Drying Time

:Surface Dry-Less than 2 hours Hard Dry - Less than 8 hours (Drying will depend upon the ambient temperature and humidity.)

  • Flash Point

:Above 35 C (95°F)

  • Directions for Use

:Ensure that the surface is free from rust, grease, moisture & loose particles. After priming the surface apply Dhanush Enamel On previous painted Surfacers primer is not necessary. Allow over night drying before application of the second coat.