Sipco PU Exterior

Two pack, air drying, acrylic aliphatic polyurethane coating for vehicle refinishing and wooden furnishings.
Features:

Areas of application
All metal, plastic & wood surfaces, any vehicles, wooden doors & furniture etc.

Caution:

In case of part mixing, which normally should be avoided, close the container lids tightly to avoid contact with moisture.
Inhalation of solvent vapors and contact of liquid with skin or eyes should be avoided where possible.
Even when ventilation is provided, respiratory, skin & eye protection wear are always recommended while spraying.

Click here to download information sheet

Sipco Hi Gloss PU Clear, Exterior

Gloss	:Hi Gloss
Recommended dry film thickness	:20-30 microns
Recoatability	:3-4 hours
Viscosity of the mix	:32-40 seconds at 30 deg. C by Fc-4
Theoretical Coverage	:Approx 10-12 sq.mtr/ltr at 20 microns
Drying time at 30 deg.	:Surface dry 20-30 min Hard dry 5-6 hours max
Pot life	:4 hours maximum
Flash Point	:Base above 24 deg C
Shelf life	:Minimum 12 months
Surface Conditions	:Dry & free from all surface contaminations temperature range of the substrate: 4 deg. C to 50 deg C
Mixing	:Mix hardener gradually into the base under continuous stirring, add only Sipco T-101 PU thinner if required.
Induction Time	:15-20 minutes
Application	:By Air Spray
Thinner	:T-101 PU Thinner
Quantity of thinner to be used	:10-25 %