SIPCOLAC SATIN FINISH

  • Surface to be painted

:Metallic & Wooden Surfaces

  • Method of Application

:Brush or Spray

  • Shades Available

:As per our Satin Finish shade card

  • Viscosity of Supply

: 90 Seconds by Ford Cup B4 at 30°C.   
  • Viscosity of application  

:Spraying-30 - 40 seconds at a pressure 3.5 Kg/Cm2(40-45 psi)  

  • Thinner recommended  

:Upto 25% by volume 

  • Drying time

:Surface dry-30 min
Recoat: Min 1 Hr.

  • Finish

:Velvety & Eggshell. An experienced applicator can yield a very smooth eggshell finish.

  • Covering Capacity

:15-17 Square meters per litre per coat depending on the surface.  

  • Flash Point

:Above 30°C  

  • Direction for use

:Ensure that surface to be painted is free of grease, rust, moisture and loose matter. 
After drying of the Primer/Surfacer and prior to the application of finishing paint, wet rub the primer with 240 abrasive paper.