SIPCO AUTO N.C. SURFACER

  • Surfaces to be Painted 

:Wooden furniture which are not subject to outdoor exposure. It  is  also well  suited  for  finishing  of  less  exposed surfaces such as the interior of drawers, cup boards etc.

  • Thinner Recommended

:NC Thinner

  • Methods of Application

:By  Brush, Conventional spray and by cloth

  • Finish

Smooth, Glossy
  • Drying Time

:Surface Dry-Less than 10 minutes. Tack Free 1-1.5 Hours. (Drying will depend upon the ambient temperature and humidity.)

  • Flash Point

:Below 20 C (95°F)

  • Directions for Use

: Ensure that the surface is free from rust, grease, moisture & loose particles. Clean  the  surface  by  rough  sanding  with  emery  paper 180 and wipe clean. If the wood  is  oily,  wipe  down  well  with  a  suitable  solvent.  Thin  down  the  NC  clear  with  NC  thinner  to  the required application consistency.

  • Shelf Life

Minimum 12 Months in unopened containers